Author Archive: admin

Author Archives for admin

used 2016 cargo mate cargo trailer,

7000lb gvw

used for storage, if I didn’t know the year I would think its brand new

barn door cam lock side door

Standard Features:
HSS Structural Tubing- Main Frame
HSS Structural Tubing Uprights
Rivet less Pre-painted Enamel Aluminum Exterior
Exterior Bonded with “VHB” two sided tape
Exposed Steel Components- Shot Blast, Primed/Painted
3/8” Plywood Interior walls
5/8” Plywood Floor
Lighted Corner Markers
HD Aluminum Door Holdbacks
Enclosed Wiring
Galvanized Hardware
Rubber Mounted Lights
Aluminum Moulding Top and Bottom
Interior Lights c/w Switch
Lighted Licence Plate
Automotive Style Undercoating
24” Checkerplate Front
7 Prong RV Plug
Aluminum Mill Finish Roof
Side Vent
Aluminum Checkerplate Fenders
Barn or Spring Assist Rear Door Ramp
Breakaway Kit
Drop Spring Axle
Radial 6 Ply Tires
Light Duty Ramp (800 lbs.)

Standard Specifications
Frame: HSS Tube Mainframe
Jack: Topwind Drop leg Jack
Axles: Two 5200 lb Spring Axles with Electric Brakes
Tires: 4-225/75D15 Tires
Rims: 15-inch White Steel Rims
Coupler: Adjustable 2-5/16 inch coupler
Hoist: Dual Cylinder
Dump Box: 12 Gauge Bed c/w 14 Gauge Sides
Tailgate: Barn Door StyleStandard Features
12-volt Hydraulic Power-pack
8 ft Remote Control
Deep Cycle Battery c/w Battery Box
Full Tubing Frame
Lockable Toolbox in A-frame (encloses powerpack)
Enclosed Wiring and Rubber Mounted Lights
LED Tail Lights
Lighted License Plate Holder
Injection Molded One-piece 7-pole RV Style Trailer Connector
Break Away System
Safety Chains and Hooks
HD Steel Fenders
Integrated tarp shroud c/w tarp brackets
PPG 2 Component Urethane

 

STANDARD FEATURES
Automotive Style Undercoating
Seals the full underside of the plywood Protects the 5/8” plywood from the elements
12” Checkerplate Front
Anodized 12” checker plate gravel guard
4 or 7 Prong RV Plug
Injected molded one-piece RV plug
Galvanized Hardware
Brass bushings
Zinc coating provides superior finish
Door Locks
Framing / Welding
.030 Aluminum Exterior Durable baked enamel finish Never rusts
3/8” Plywood – Interior Walls
Protects exterior walls from dents
Increases the structural integrity of the trailer
Provides for easier clean-out
Ramp or barn style rear doors

Standard Features:
HSS Structural Tubing- Main Frame
HSS Structural Tubing Uprights
Rivet less Pre-painted Enamel Aluminum Exterior
Exterior Bonded with “VHB” two sided tape
Exposed Steel Components- Shot Blast, Primed/Painted
3/8” Plywood Interior walls
5/8” Plywood Floor
Lighted Corner Markers
HD Aluminum Door Holdbacks
Enclosed Wiring
Galvanized Hardware
Rubber Mounted Lights
Aluminum Moulding Top and Bottom
Interior Lights c/w Switch
Lighted Licence Plate
Automotive Style Undercoating
24” Checkerplate Front
7 Prong RV Plug
Aluminum Mill Finish Roof
Side Vent
Aluminum Checkerplate Fenders
Barn or Rear Door Ramp
Breakaway Kit
Drop Spring Axle
Radial 6 Ply Tires
Light Duty Ramp (800 lbs.)

HSS Structural Tubing- Main Frame
HSS Structural Tubing Uprights
Rivet less Pre-painted Enamel Aluminum Exterior
Exterior Bonded with “VHB” two sided tape
Exposed Steel Components- Shot Blast, Primed/Painted
3/8” Plywood Interior walls
3/4” Plywood Floor
Lighted Corner Markers
HD Aluminum Door Holdbacks
Enclosed Wiring
Galvanized Hardware
Rubber Mounted Lights
Aluminum Moulding Top and Bottom
Interior Light c/w Switch
Lighted Licence Plate
Automotive Style Undercoating
12” Checkerplate Front
7 Prong RV Plug
Aluminum Mill Finish Roof
Side Vent
Aluminum Checkerplate Fenders
Barn or Spring Assist Rear Door Ramp
Breakaway Kit
Drop Spring Axles
Radial 6 Ply Tires
Light Duty Ramp (800 lbs.)

Axle Size
(2) 7,000 lb Drop
Axles
8 Stud with Electric Brakes
Deck Height
22-23″
Width
102″ Overall Width
Tilt
Single Cylinder with Hydraulic Power Pack
Coupler
2 5/16″ Adjustable
Crossmembers
3″ Channel on 18″ Centers
Pockets
3/16 Preformed with Full Length 3/8″ Rubrail
Fenders
14g Treadplate (83″ between fenders)
Tire & Rim
ST235/80R16, 8 Bolt
Landing Gear
(1) 12,000 lb
Toolbox
A-Frame
Safety Chains
5/16 Grade 70 Chain with Grab Hooks
Wiring
Arctic Wiring, Soldered & Enclosed in Conduit
Lights
Rubber Mounted LED
Decking
2″ Treated Wood, fastened with 1/4″ Torx Screws
Finish
Sandblasted and Painted with PPG Urethane Paint

Axle Size
(2) 7,000 lb
Width
102″ Overall Width
Deck Height
36″
Lace Rail
5″ Channel with Pockets & Rubrail
Coupler
2 5/16″ Adjustable
Crossmembers
3″ Channel on 18″ Centers
Tire & Rim
235/80R16
Landing Gear
(1) 12,000 lb
Toolbox
None
Safety Chains
5/16 Grade 70 Chain with Grab Hooks
Wiring
Modular Wire Harness
Lights
Rubber Mounted LED
Decking
2″ Spruce, fastened with 1/4″ Torx Screws
Finish
Sandblasted and Painted with PPG Urethane Paint

Back to top